Your account is powered by Storbie. To edit your profile visit my.storbie.com
1 Pack
It can take up to 30 minutes until the heat patch warms up to an effective heat level. Thus, the pouch should only be opened directly before use. The patch should only be applied on clean, dry and unbroken skin. Open the pouch and remove the sealing paper from the back of the patch. Place adhesive side of Spiral Heat to the skin directly over the painful area and press on firmly. After use slowly peel off from the skin. The patch should not be worn for more than 12 hours within any 24 hour period. Only for single use - for each application use a new patch to retain the described heat effect.
As with any heat product, the patch has the potential to cause skin irritation or burns. Therefore, it is recommended to avoid circumstances that may increase the heat effect e.g. tight clothing or additional pressure. Moreover, you should periodically check the skin reactions.
Iron, activated carbon, salt, water.
Plastic
Height: 214mm, Width: 4mm, Depth: 114mm, Weight: 25g
Elastoplast
